(67) 425 olds

Moreno_831

New member
Thread starter
Mar 25, 2020
23
4
3
The 165 is a hair low. Not terrible.
Driver side was 180 all across passenger side was a bit up and down.... just sent the carb off for a rebuild... I should get a couple more years with this compression? Not trying to open it up.
 

TURNA

Active member
Oct 5, 2018
189
96
28
NY
Driver side was 180 all across passenger side was a bit up and down.... just sent the carb off for a rebuild... I should get a couple more years with this compression? Not trying to open it up.


You will be fine

worst case is check the 165 cylinders plug so its not fouling out from oil
 

Moreno_831

New member
Thread starter
Mar 25, 2020
23
4
3
Can anyone tell me what these vacuum are for? Should there be a hose or just plug them 67 olds delta 88 425cu
 

Attachments

  • B591426B-7B0D-46A0-8810-ED89CA809904.jpeg
    B591426B-7B0D-46A0-8810-ED89CA809904.jpeg
    323.4 KB · Views: 389

Olds 307 and 403

Well-known member
Oct 4, 2018
996
265
63
Melville, Saskatchewan
Was that one open? If so that could very well be your poor running issue. Yeah just plug them.
 
  • Like
Reactions: Moreno_831

Moreno_831

New member
Thread starter
Mar 25, 2020
23
4
3
Before and after carb rebuild
 

Attachments

  • 60E21748-1681-41D7-B2F5-9BB35D197A46.jpeg
    60E21748-1681-41D7-B2F5-9BB35D197A46.jpeg
    1.9 MB · Views: 382
  • 95F05066-6E17-4037-BB9C-22551C6C4D91.jpeg
    95F05066-6E17-4037-BB9C-22551C6C4D91.jpeg
    1.6 MB · Views: 389
  • Like
Reactions: TURNA

Olds 307 and 403

Well-known member
Oct 4, 2018
996
265
63
Melville, Saskatchewan

Latest posts