FOR SALE EFI stuff, BBO Torker, throttle body, injectors

[rfpowerdude]

Selling the Torker that is plumbed for port EFI, the Accel injectors and the 1200cfm Accel throttle body with IAC and TPS.


Torker

Accel 150836 injectors

Accel 1200CFM Throttle body (earlier version of the 74202S4)

I had the Torker installed for a while using a carb. I never got to use the injectors or throttle body. They have just been sitting.
I have about $1200 into this. Make offer. Will split it up. Here are links to the injectors and throttle body new:

Accel injectors
https://www.jegs.com/i/Accel/110/150836/10002/-1
https://www.amazon.com/dp/B0006HJOCM/?tag=oldspower-20

Throttle body
https://www.summitracing.com/parts/acc-74202s4
https://www.amazon.com/dp/B000A8OFBW/?tag=oldspower-20

Throttle body was $500 from Mark Remmel on here (cutlassEFI). Injectors were like $300 originally. Torker and EFI mods, $400 originally (used Torker $150, EFI plumbing $250)
I can supply more pics.
Make offer on all or pieces...

 

[Dr78442]

PM sent

 

[rfpowerdude]

I didn't get a PM on here (Oldspower), but I did on the other site. I responded with my cell # and an answer...

 

[rfpowerdude]

I've had some PM questions. If I were to sell individually, it would start as follows:

Billet throttle body - $300+ship
Injectors - $175+ship
Intake - $275+ship

All together, $625+ship. All negotiable to some degree. Open to offers. I must mention that all threads on the Torker are good EXCEPT the larger passenger side rear vacuum hole. The threads would have to be chased with a NPT tap to clean it up. Otherwise, it is good to go.

 

[rfpowerdude]

Pending/in-progress sales of all of it.