Search results

  1. K

    [CANCELED] 2020 G-Body Classic, July 25th, Cleveland OH

    Ahhh, that's B.S. that event will be safe. They've opened everything in Ohio.
  2. K

    Dug up another "Dead Soldier"

    I've been keeping busy, cleaning up and mowing. It's a real project every spring. Probably 60 trees in the front yard alone. Lots of sticks! Thank Goodness for those grabbers with the suction cups! When I buy a pair I epoxy the screws in and drill two holes in the suction cup for small zip ties...
  3. K

    Olds engine parts for sale

    Ahh, good old Charlotte. My Son has lived there for 20 years. He started out living in the Ballentine area. Three moves later, he has a house in Indianland S.C. I took basic training at Fort Jackson, S.C. in 1969. It's unbelievable how the whole area changed. Good luck with the sale.
  4. K

    Olds engine parts for sale

    I might have missed it, what's your location? Thanks
  5. K

    Dug up another "Dead Soldier"

    I made it back, SAFE! I didn't want to go through Columbus, OH so I went the longer way down. I actually went to Charleston, WV then hung a right heading west then another right towards the Ohio River and back to Ironton, Oh. Going back I went the 20 minutes faster through Columbus. I was on a...
  6. K

    (67) 425 olds

    The 165 is a hair low. Not terrible.
  7. K

    Dug up another "Dead Soldier"

    :eek:Tomorrow I'm breaking "quarantine" to make a parts run road trip. Where I'm going is out in BFE, (Bum F*#k Egypt) It's actually still in Ohio but so hard to get to. I have to drive into W.Va 30 to 50 miles then hang a right and back up into Ohio. Yikes o_O Hopefully the Gestapo doesn't...
  8. K

    Tennessee

    Yes, hopefully they'll still have it. I thought about going but one, it's a long haul from N.E.OHIO, AND 2, one has to be a member to sell parts. The last one I went to was Gettysburg. Terrible weather, rain, rain, and more rain! The host Hotel will NEVER have the Oldsmobile meet again. The...
  9. K

    Tennessee

    I believe that Oldsmobile Club of America is going to have the national meet in Tennessee, maybe.
  10. K

    455 out of Ninety-Eight Going into 1980 Cutlass G Body

    Full size cars (88&98) had long shaft turbo 400. Either have new shorter driveshaft or different shorter trans. Crossmember moved back. Tube Headers that fit are pricey
  11. K

    Supercars Unlimited Mounts

    Here the Anchor #s. 1973-1988 frame mounts (all) - use P/N 2328 motor mounts
  12. K

    Supercars Unlimited Mounts

    Supercars are "usually" good but one never knows till you install them.
  13. K

    Dug up another "Dead Soldier"

    I spent yesterday "playing" with these Crane "gold" roller rockers. I'm only using the Erson TQ 40, an okay camshaft for street use. It's 220/228 @0.050 .504/.504 110. I used this camshaft in another engine near 20 years ago. Cam and lifters are like new. I would have used standard rockers and...
  14. K

    (67) 425 olds

    I'll try to shorten this up a bit. Guy "REALLY NEEDS" this interior, did I forget to say, THIS GUY REALLY NEEDS THIS INTERIOR! (Now to the part why they call me "Mr Nice Guy") I say, how far are you from Niagara Falls? He says, 15 hours driving time. I'm 3 hours more beyond the Niagara Falls, in...
  15. K

    (67) 425 olds

    Even though I'm not on Facebook, I hear it's the "Hot" place to buy/sell auto parts/cars. I've been meaning to join but never have. Craigslist is pretty much dead since they started charging to sell a car. They thought they were going to make some revenue but instead killed the golden goose. In...
  16. K

    (67) 425 olds

    That's the factory "S" dual exhaust, that's as good as it gets on those cars. The "rear" steering box is in the way for any kind of headers. The A-body (cutlass) is "front" steering box.
  17. K

    (67) 425 olds

    That's a plus but there's still the rear gears problem and the weight of the bigger "girls."
  18. K

    Dug up another "Dead Soldier"

    Well good news, bad news. Good news is I got a Christmas present early(from myself). I spent some of my " communion money"(a story I've been using for a half of century) and bought a used but nice shape Crane 1.6 roller rockers. I had the studs and guide plates. The bad is I can't use the black...
  19. K

    Dug up another "Dead Soldier"

    Valve covers cleaned up decent. Just set the big "sucking" Edelbrock Torker on it mainly to keep dust out. I'm looking for an intake gasket. I found two "turkey trays" but I don't want to use one of those. I think I have a set over in one of my buildings. It's about a 3.5 mile drive, maybe...
  20. K

    Dug up another "Dead Soldier"

    Happy Easter, hopefully everyone is doing well. Staying home today, as every day lately. I sprayed the head gaskets with copper last night. I was in the garage at 5am today. I cleaned everything, put the bad boy C heads on. Rather than use 53 y/o head bolts, I dug out a set of ARP bolts with the...